nsaequi.blogg.se

Huawei e303 firmware update
Huawei e303 firmware update









huawei e303 firmware update

Just provide the unlock code that you generated from my first thread. Now just select it and click on unlock Modem. Now run the Huawei Modem Code Writer tool and click on “Please Select Com Port.ĥ. Now after a few minutes it will be finished. When firmware will ask for password then provide the password as flash code which you have already noted.Ĥ. Now run the Firmware version 21.157.31.00.850 or higher to flash your modem with generic firmware. Now run the universal master code and generate the flash code of your IMEI through Huawei tab or from my first thread when u generate ya unlocking code and note down somewhere.Ĥ. Now disconnect the internet and close all the running software / dashboard / connection manager of modem.ģ. Now download the univeral master code and huawei modem code writer tool also from the link below.Ģ. Download the firmware version 21.157.31.00.850 or higher from the download link which is provided below. Not sure if the above is the latest firmware for it (firmware for hg659b is also available), however, similar approaches could be used if needed for later. Step by step guide to unlock your E173z, u, s,-1&2 Huawei E303 HiLink Modem Free :ġ. Note : Make sure that you have sufficient battery backup while you flashing your modem, if any interruption while flashing then your modem will be dea forever.

huawei e303 firmware update

With this firmware, the device behaves like a classic USB modem: there is a command AT-port through which you can establish a connection using the PPP protocol (RAS).Huawei E173z, u, s,-1&2 E303 Modem types comes with customise firmware and it can not be unlocked via inputing unlock code directly. This is how almost all previous-generation 3G modems work. The speed is limited - no more than 20-30 Mbit at the reception. In addition to the PPP mode, there is an NDIS mode. In this case, the modem emulates a network interface through which data is transmitted, and only control commands are sent through the AT port. The main feature of the stick mode is to establish the connection and support the operation of the channel using the OS of the computer to which the modem is connected. At the same time, the computer receives an IP address directly from the cellular provider through a DHCP request, and the modem acts as a network bridge, transmitting the packets from the computer to the cellular network and back without changing them. The initial USB stick stick composition is a virtual CD-ROM and microSD card reader. In order for modem ports to appear, you need to switch the composition. Under windows, this is done by carrier software available on a virtual CD, or by the huawei proprietary program Mobile Partner. #Huawei e303 firmware update wizard software

huawei e303 firmware update

Under linux, switching is done by the usb-modeswitch program.

huawei e303 firmware update

It is possible to prohibit the transformation of songs. With HILINK firmware, the modem works in the router mode and is presented to the computer as a network interface (usb-ethernet-rndis).

  • #Huawei e303 firmware update wizard software.










  • Huawei e303 firmware update